Acrylic Resurfacer is a concentrated, 100% acrylic latex binder designed for field mixing with silica sand and is to be applied to recreational surfaces constructed of hot-mix asphalt or Portland cement concrete.
Acrylic Resurfacer is intended for preparing new asphalt or concrete surfaces as well as existing acrylic surfaces for color coating.
The following mix has been found to be satisfactory for average surface conditions:
Acrylic Resurfacer 55 gallons
Silica Sand (60-80 Mesh) 600-900lb.
Clean potable water 20-40 gallons
Acrylic Resurfacer 30 gallons
Silica Sand (60-80 Mesh) 325-400lb.
Clean potable water 11-22 gallons
Coverage rate (undiluted): 0.06 gallons/sq. yd.
Weight per gallon: 8.8lbs
Curing conditions: 70 degrees F & 50% relative humidity
Estimated cure time: 2 hours
Minimum ambient, surface and product installation temperature: 60 degrees F and rising
Note: Low temperatures or high humidity will increase drying time drastically. Maximum surface temperature is 140 degrees F.